Hi all, whilst DHL & Royal Mail are working we are shipping parts, chemicals etc daily. Thanks, Mr Tubby Team.

HOT TUB & SPA BATH PIPE CLEANER - FLUSH - 500ml

£12.50
Linked InFacebook
Information
SPA & HOT TUB FLUSH
Spa & Hot Tub Flush should be used before the water is
de-commissioned / drained down (typically no longer than 12 weeks
for domestic spas and hot tubs) although heavy use will require more
frequent drain downs. This product is formulated to internally clean
all the pipework and fittings and will also loosen biofilms which can
provide an ideal environment for harmful viruses and bacteria to live.
Instructions
1. Remove all filters and erosion feeders prior to application of product and
ensure filters are thoroughly cleaned before re-installation
2. Ensure all covers are removed / in the open position during the application
process.
3. Ensure water level is at normal operating height so that product
is circulated thorough-out the system
4. Turn on all pumps / boosters pumps and pour 250ml of product directly into
the main skimmer / filter compartment. This dose will treat up to 1750lts of
water.
5. Open all circulation valves and run pumps for a minimum of 15 minutes
6. Turn off all pumps / circulation and let water stand for 15 minutes
7. Turn on all pumps and booster pumps for a further 15 minutes
(some foaming may be experienced during this time)
8. Drain water and flush jets and spa / hot tub surface with fresh
water to remove any stubborn deposits.
9. Re-fill with fresh water and commission in the normal manner
10. Ensure recommend sanitiser levels are added as per manufacturer guidelines.
11. It is recommended this process is carried out at least every 3
months (12 weeks) for domestic hot tubs up to moderate usage,
for heavy usage increase dosage to every 6 weeks. For commercial
application a minimum of a weekly application will be required.
Reviews
Not yet reviewed
Write an online review and share your thoughts with other shoppers!
Be the first to review this product